Skip navigation
Durbal Gelenklager Gelenkköpfe

Accessories

Basic

A wide variety of combinations with products from the DURBAL Premium Line, DURBAL Classic Line and DURBAL Basic Line is possible.

DURBAL offers threaded links for linkages, threaded bolts for rod ends and spherical plain bearings. DURBAL also offers washers and rubber protector caps for rod ends and hexagonal locking nuts.

Special characteristics:

  • Threaded links can be combined with all our rod ends with male threads of the Premium, Classic and Basic Lines (Standard and inch versions)
  • They are used for the independent production of system linkages.

01 / GW _-_

Threaded links with female thread and weld seam preparation for the production of system linkages; Standard or  inch threads. From sizes 6 mm to 30 mm or 1/4" to 1/1".

PDF product data sheets

DURBAL-gewinde-ende-GW.pdf
pdf - 947 KB

Special characteristics:

  • Threaded bolts are used to form corner joints and can be fitted in rod ends and spherical plain bearings.

01 / BOK _-00-_ or BOK _-60-_

Threaded bolts in Standard or stainless steel version; can be fitted in rod ends and spherical plain bearings of Series K of the DURBAL® Classic and Basic Lines. From bore diameter 6 mm to 20 mm.

PDF product data sheets

DURBAL-gewindebolzen-BOK.pdf
pdf - 953 KB

Special characteristics:

  • Washers and rubber protector caps prevent the penetration of coarse dirt particles into the bearing

01 / DDG _-00-100

Washers are used to provide additional protection for the bearing and can be fitted in rod ends of Series K of the DURBAL® Classic and Basic Lines. From bore diameter 5 mm to 30 mm.

02 / DGS _

Rubber protector caps are used to provide additional protection for the rod end and can be fitted in rod ends of Series K of the DURBAL® Classic and Basic Lines. From bore diameter 6 mm to 30 mm.

PDF product data sheets

DURBAL-dichtscheiben-DDG.pdf
pdf - 984 KB
DURBAL-gummischutzkappen-DGS.pdf
pdf - 979 KB

Special characteristics:

  • Hexagonal locking nuts are available with standard threads, fine threads and inch threads. Available with our rod ends from the Premium, Classic and Basic Lines

01 / _-00-936

Hexagonal locking nuts, low form, similar to ISO 4035 / 8675 (DIN 439 / 936). From 5 mm to 60 mm.

02 / _-60-936

Hexagonal locking nuts of stainless steel, low form, similar to ISO 4035 / 8675 (DIN 439 / 936). From 5 mm to 24 mm.

03 / _“-00-936

Hexagonal locking nuts, in stainless steel, low form, similar to ISO 4035 (DIN 936). From 1/4" to 1/1".

PDF product data sheets

DURBAL-sechskantmuttern.pdf
pdf - 943 KB