Skip navigation
Durbal Gelenklager Gelenkköpfe

Heavy-duty rod ends

Premium

A rod end (DIN ISO 12240-4) is generally a standardised, ready-to-install machine element. Rod ends are used for the transfer of static and dynamic forces in connection with swivelling, tilting and turning movements.

The heavy-duty rod ends in our DURBAL Premium Line in accordance with DIN ISO 12240-4 consist of a housing and an inner ring with integral self-aligning roller or ball bearing. They are available

  • in Series K
  • as a special version
  • in inches.

Rod end available in several versions

All versions are also available with female or male threads. The rod ends with self-aligning ball bearings are also available in a stainless steel version. We also offer rod ends in accordance with DIN ISO 8139 with pneumatic cylinder connections.

Durbal Gelenkköpfe

Long service life with low maintenance required.

The heavy-duty rod ends in our DURBAL Premium Line are low maintenance. They can be regreased using a funnel-type grease nipple or conical grease nipple and have food-grade approval. Further special grease nipples are available on request. Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing, thereby ensuring a longer service life.

The heavy-duty rod ends of the DURBAL Premium Line are especially suited to use at high speeds, with large swivelling angles or rotating movements. They can also take heavy loads.

PDF product data sheets

DURBAL heavy duty rod ends BRTM 0050105
pdf - 984 KB
DURBAL heavy duty rod ends BRTM 3050105
pdf - 985 KB
DURBAL heavy duty rod ends BRTM 0050105 inch
pdf - 986 KB

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • High loads
  • Low maintenance thanks to long-term lubrication with food-grade approval; the rod ends may be regreased using a conical grease nipple. Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / BRTM _-00-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, Series K, male thread; connection dimensions in accordance with DIN ISO 12240-4. The cage design is suitable for high speeds. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 12 mm to 40 mm.

02 / BRTM _-30-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, Series K, male thread; connection dimensions in accordance with DIN ISO 12240-4. In contrast to the cage design, the full complement design is suitable for higher loads but with a lower speed limit. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 12 mm to 40 mm.

03 / BRTM _“-00-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, male thread; dimensions in inches. The cage design is suitable for high speeds Available as a complete system solution or separately with threaded links and hexagonal locking nuts, inch threads. For shaft diameters from 1/2" to 1/1".

PDF product data sheets

DURBAL heavy duty rod ends BRTM 00501
pdf - 984 KB
DURBAL heavy duty rod ends BRTM 30501
pdf - 985 KB
DURBAL heavy duty rod ends BRTM 00501 inch
pdf - 986 KB

 

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • High loads
  • Low maintenance thanks to long-term lubrication with food-grade approval; the rod ends can be regreased using a conical grease nipple. Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / BRTF _-00-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, Series K, female thread; connection dimensions in accordance with DIN ISO 12240-4. The cage design is suitable for high speeds. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 12 mm to 40 mm.

02 / BRTF _-30-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, Series K, female thread; connection dimensions in accordance with DIN ISO 12240-4. In contrast to the cage design, the full complement design is suitable for higher loads but with a lower speed limit. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 12 mm to 40 mm.

03 / BRTF _“-00-501

Heavy-duty rod ends with integral self-aligning roller bearing, low maintenance, female thread, dimensions in inches. The cage design is suitable for high speeds. Available as a complete system solution or separately with threaded links and hexagonal locking nuts, inch threads. For shaft diameters from 1/2" to 1/1".

PDF product data sheets

DURBAL heavy duty rod ends BRTF 00501
pdf - 1,005 KB
DURBAL heavy duty rod ends BRTF 30501
pdf - 1,007 KB
DURBAL heavy duty rod ends BRTF 00501 inch
pdf - 1,006 KB
Durbal Gelenkköpfe

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • Low bearing friction
  • Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be regreased using a funnel-type grease nipple (up to size 10 or 3/8") or using a conical grease nipple (from size 12 or 1/2"). Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / BRM _-00-501

Heavy-duty rod ends with integral self-aligning ball bearing, low maintenance, Series K, male thread; connection dimensions in accordance with DIN ISO 12240-4. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 6 mm to 30 mm.

02 / BRM _-60-501

Heavy-duty rod ends of stainless steel with integral self-aligning ball bearing, low maintenance, Series K, male thread; connection dimensions in accordance with DIN ISO 12240-4. Available as a complete system solution or separately with stainless steel hexagonal locking nuts. For shaft diameters from 8 mm to 20 mm.

03 / BRM _“-00-501

Heavy-duty rods end with integral self-aligning ball bearing, low maintenance, male thread, dimensions in inches. Available as a complete system solution or separately with threaded links and hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".

PDF product data sheets

DURBAL Heavy-duty rod ends BRM 00 501
pdf - 986 KB
DURBAL Heavy-duty rod ends BRM 60501 b
pdf - 1,003 KB
DURBAL Heavy-duty rod ends BRM 00501 inch
pdf - 986 KB
Innengewinde Durbal

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • Low bearing friction
  • Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be regreased using a funnel-type grease nipple (up to size 10 or 3/8") or using a conical grease nipple (from size 12 or 1/2"). Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / BRF _-00-501

Heavy-duty rod ends with integral self-aligning ball bearing, low maintenance, Series K, female thread; connection dimensions in accordance with DIN ISO 12240-4 and DIN ISO 8139 for pneumatic cylinders. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 6 mm to 30 mm.

02 / BRF _-60-501

Heavy-duty rod ends of stainless steel with integral self-aligning ball bearing, low maintenance, Series K, female thread; connection dimensions in accordance with DIN ISO 12240-4 and DIN ISO 8139 for pneumatic cylinders. Available as a complete system solution or separately with stainless steel hexagonal locking nuts. For shaft diameters from 6 mm to 20 mm.

03 / BRF _“-00-501

Heavy-duty rod ends with integral self-aligning ball bearing, low maintenance, female thread, dimensions in inches. Available as a complete system solution or separately with threaded links and hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".

PDF product data sheets

DURBAL Heavy-duty rod ends BRF 00501
pdf - 926 KB
DURBAL Heavy-duty rod ends BRF 60201
pdf - 1,007 KB
DURBAL Heavy-duty rod ends BRF 00501 inch
pdf - 1,008 KB
Durbal Aussengewinde

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • Low bearing friction
  • Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be regreased using a funnel-type grease nipple. Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / PM _-00-501

Heavy-duty rod ends with integral self-aligning ball bearing, low maintenance; male threads in standard length with designation PM _-00-501. In shorter form with designation PM _-01-501. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 5 mm to 20 mm.

PDF product data sheet

DURBAL Heavy-duty rod ends PM 00501
pdf - 965 KB
Durbal Sonderausführung

Special characteristics:

  • For high speeds, large swivelling angles or rotating movements
  • Low bearing friction
  • Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be regreased using a funnel-type grease nipple. Further special grease nipples available on request
  • Covering discs on both sides prevent the penetration of coarse dirt particles into the bearing

01 / PF _-00-501

Heavy-duty rod ends with integral self-aligning ball bearing, low maintenance, female thread. Available as a complete system solution or separately with threaded links and hexagonal locking nuts. For shaft diameters from 10 mm to 20 mm.

PDF product data sheet

DURBAL Heavy-duty rod ends PF 00501
pdf - 1,016 KB